The screw spindle pump S-VSA 150 is designed to operate in the vacuum. STB GmbH developed a replacement mechanical seal for the pump type S-VSA 150 to take the place of the standard metal bellow seal. Through the use of a group spring the metal bellow can be replaced. The mechanical seal of the type S130 is by this special feature not only economical, it also has a high availability. The seal faces are relieved by their design and offer high operation time, low wear and tear and reduced frictional heat development. Due to the high versatility of the pump specifying the fluid is mandatory to allow the optimization of the materials, especially on the secondary seal.

Configuration and facts

Compatible with:

  • S-VSB 120 (mechanical seal: S130-S1-35)
  • S-VSA 150 (mechanical seal: S130-S1-35)
  • S-VSA 330 (mechanical seal: S130-S1-45)

Mechanical seal type:

  • S130-S1-35 (Part number: 15140850)
  • S130-S1-45 (Part number: 15140849)

Original equipment manufacturer:

  • Gardner Denver
  • Elmo Rietschle

Base design:

  • Single-acting mechanical seal
  • Component seal
  • Group springs
  • Relieved seal faces
  • Rotation-direction independent

Size:

  • Shaft diameters 35 mm / 45 mm

Temperature:

  • -20°C to +140°C

Sliding speed:

  • Up to 10 m/s

Allowed axial movement:

  • ± 1,0 mm

Materials:

  • Seal face: antimony or synthetic resin carbon graphite
  • Stationary seat: special chrome molybdenum cast
  • Metal parts: 1.4571
  • O-ring secondary seal: NBR (Nitril-Butadiene-Rubber)
  • Spring: 1.4310 or Hastelloy C4